Regardless of whether you are a craftsman, a professional building contractor or just a private person who likes to tinker with things, a drill would prefer to be in your tool inventory. What type and brand should you buy? Conveniently, a good cordless drill is one option. You can compare some of the best cordless drills on the market today using the following link: https://cordlessdrillguide.com.
Below you will find everything else you should consider when buying the best cordless drill on the market.
What type of drill do you need?
There are basically four types of drill bits that correspond to their specific functions:
- drill – This cordless drill, which also acts as a screwdriver, is considered by many to be the most popular power tool. This single tool is so great that it does a lot of work. You can activate the drilling function and use a keyless chuck that can accommodate various drills such as circular drills and hexagonal drills. You can then activate the screwdriver function by inserting the hexagon screwdriver. It also has the adjustable slip clutch so the screwdriver stops when it hits the intended spot in the wood.
- percussion drill – This is used to get screws in masonry areas where you have to hammer a lot. You cannot use any kind of bits that fit into it. Instead, you only need masonry. This type of drill performs two actions: drilling and reciprocating to allow the drill to penetrate concrete and stone.
- Rotary Hammer – This type of drill is very similar to the hammer drill in that it also performs the same two movements when used on masonry products. The difference is that rotary hammers are more powerful because they use a piston mechanism instead of the special clutch that rotary hammers use.
- impact wrench – If you ever need to drive a lot of screws home and feel that the screwdrivers don't give you that much power, this tool is designed to do just that faster and more powerful. Impact wrenches look similar to the drill screwdrivers, with one major difference. Drill drivers have a keyless chuck, while impact wrenches have collet chucks that only hexagonal bits can hold.
What kind of functions do you need?
Each drill model and each drill brand was specially developed for the respective requirements. The manufacturers therefore strive to make each tool unique. What you should be concerned with is identifying the type of projects you normally run and using them as the basis for the type and specifications of the drill bits you need.
You can use the following features to decide what works best for you:
- Battery – The capacity of the battery is crucial for the overall performance of the battery drill. Newer tools use lithium-ion (Li-ion) batteries, while older ones use nickel-cadmium (NiCd) batteries. The basic difference between the two is that the Li-Ion is smaller and more environmentally friendly than NiCd. However, due to the additional protective circuit, the production is 40% more expensive, which is reflected in a higher selling price. In terms of capacity or ampere hours, the higher Ah, the longer the charging process lasts. Look for the one that loads faster and lasts longer, that can be more expensive, but that pays off.
- Voltage – You should be able to determine at an early stage whether you are only carrying out light drilling work or whether extensive projects are being planned. This will help you decide whether to buy a low or high power drill. A nominal voltage of 4 to 8 volts would be sufficient for light DIY projects. On the other hand, you have to choose a voltage of 12 to 18 for everything else, but you have to expect that drills with these volts are pretty heavy.
- Chuck size and type – Chucks are an indispensable accessory and, depending on the type, size and type of holes planned, can handle a variety of tasks. The types of chucks include quick-action, key and dowel chucks. The wedge type obviously uses a wedge to tighten the grip, which improves torque. Compared to the keyless type, it has a smaller body that offers more space for drilling, especially on mini lathes. On the contrary, the keyless guy just needs to be turned a little bit by your hands, and that's it. In the meantime, the jaw of the dowel chuck has been drilled out to make contact with the dowel. This type of chuck was specially developed for holding dowels and does not apply to drills. This provides a secure hold without damaging the wood.
- Torque and speed settings – There is an inverse relationship between speed and torque in the sense that if you increase the speed the torque will decrease. In the same way, you can get the most torque by lowering the speed. When choosing between different drill models, you should consider the torque and speed. However, you might be misunderstood that higher numbers are always better. In some cases and brands, the lower ones are more advisable.
- Additional functions – There are also a number of features that, while not necessarily making or disrupting your purchase decision, can greatly improve your overall drill experience. One of them is the belt clip, which can be really useful if you want the drill to be available when you need it. Belt clips save you from having to bend down to pick them up or leave your station as you can easily hang the drill on your belt. Another useful feature is the LED light, which allows you to work in dark rooms as easily as in basements and under tight spaces.
parting words
Unfortunately, if you try to find the perfect exercise that can blind you to anything else, there is none. Each has its advantages and disadvantages, depending on the project. Taking into account the above specifications, you should be able to make the best choice. However, if in doubt, contact an expert. Experience is still the best teacher.
