The best way to use a thickness planner – efficient ideas

A planer is all you need to have your own DIY woodworking projects. If you just build in a closet or turn a useless space into a library, you can invest in this tool. With additional tools such as a dust mask, eye protection, earplugs and rough wood, you can use a thickness slicer to create uniform boards that are ready for a fine finish.

The following article shows you steps to use the tool safely and effectively.

Select planner

You have to keep in mind that there is a wide range of planer options that are designed for builders and homeowners. Most of them are easy to use and have a compact design. Some of the most popular brands for Thickness planner Products currently available on the market include Ridgid, Makita, Dewalt, Ryobi, Delta and Rockwell. With just $ 400, you get a planer that can be used for boards up to 13 inches wide.

Position the planner

The current designs of most planers fit into any type of workshop. To operate the device, you must position it directly next to the power supply. This is to prevent the cable from disturbing the work area. Remember that the power supply is safest as long as you plug it directly into the wall outlet.

This is because the extension cord can cause overheating, which can lead to a fire later. In this way, make sure that there is enough space in front of the tool for the wood feed. You must also provide enough space behind the planner for the outlet. For safety reasons, do not forget to keep the pipes and fittings for electrical devices away. This is also important to secure the base of the planer to your work table and prevent it from tipping over or tipping over during use.

Using a thickness planer - thickness planer

Selection of the material of the planner

Picking up the lightest material for the planner is important because the purpose of the tool is to transform simple wood into a fine product. Make sure you select a tool that is at least ¾ inches wide and 14 inches long. The limiting factor for board length is usually the distance you can find on each side of the device. Redwood is usually strong, durable, and rich in shades. Meanwhile, mahogany has a dark hue, while cedar gives you brilliant streaks and a fresh pine scent.

Planning the planner

You should know that Thicknessing machines Usually some adjustments need to be made. They are needed to determine the end product you want to create. Make sure that you plan the wood on both sides, maintain the even moisture of the wood and avoid warping. Remember to turn on the tool and turn the depth adjustment crank to the thickness you prefer most. Avoid switching on the device while the material is still in the feeder. Depending on the thickness of the removal material, you may need to feed the wood several times to achieve the desired thickness.

Leave a comment