Saber saws are commonly known as "sawzalls" but can have many names. One thing is certain, they are not like every saw on the market – most different types of saws are designed for a cutting style. Well, a saber saw can cut through a lot of materials, and the only thing you need to change to achieve this is a saw blade.
However, there are some things you need to know when using them – how to use them. You have to be sure and setbacks on these saws are very simple and can also occur frequently. So you need to be sure that you are holding the saw and using it properly so you don't lose a link. Fun fact, in Belgium they are called Reciprozaag, which we think is a pretty cool word.
Keep your hands and feet at a safe distance
First of all, you need to keep your hands as far away from the blade as possible. How do you do that when your hand is so close? Fortunately, most Sawzall have a rubber boot on the front of the saw and you will keep this boot forever. There is a lot of vibration, but as long as you hold the rubber boot, you should be able to control the saw much better and prevent it from jumping around anywhere, which could injure you.
The other hand should always be on the handle with the trigger to control the saw. When you cut, you want to have a firm grip on the handle and keep your finger as relaxed as possible when you pull and pull the trigger. This way, you can let go at any time and turn the saw off (and stop) when the saw strikes back or when you have a problem with it bouncing or vibrating too much. Many accidents happen simply because a person not only grabs the wrong saw, but also the trigger.
Never cut towards you
This doesn't just apply to scissors and knives – you don't want a saw blade to fly at you if it slips – especially an electric saw blade that can cause fatal damage. You should:
Always expect problems when cutting into walls or floors. You'll need to consider where other obstacles are that could be a problem and expect them to get in your way (wires and plumbing tend to be under walls and floors – which makes them a dangerous obstacle that can damage the saw or you). If you hit a hook, your saw will push and pull even when your saw blade is not running. It basically works like a jackhammer. In this case, you have to let go of the trigger, remove the saw blade from the binding by wiggling it from the wedge cut, and then start over.
Conclusion
One thing is certain – it is not rocket science when it comes to using a saber saw, but they are just as dangerous and prone to accidents. Not only that, they get pretty hot too, so you should never grab the blade. In both cases, these tips can help you ensure that you are using the saw properly.
