Learn how to clear an ice maker

Do you have an ice machine at home? How to clean it properly!

Photos by: Unsplash

Restaurants, hotels, bars, and other businesses rely on ice makers for a variety of purposes. Restaurant and business owners often overlook the importance of cleaning ice cube makers frequently, even though they are an essential part of any kitchen setup. In this post, we'll walk you through the process of cleaning an ice machine, step-by-step, so your customers can be sure that their ice cream is safe.

Keep your ice maker clean

Ice machine maintenance requirements differ from provider to provider, but the general process is the same. Here are some general techniques for cleaning most ice cube makers. Consult your machine manual for specific instructions.

Remove the ice cubes from the ice bucket

Remove all ice during the cleaning and disinfection process. There are two ways to accomplish this goal. Alternatively, you can turn off the power and wait for the ice to melt completely before pressing the power button. This option is best for those who prefer to harvest ice cream in batches.

The "Clean" or "Wash" button should be pressed: After pressing this button, the water is drained through the water drain valve into the garbage disposal unit below. To start adding chemicals, wait for the water tub to refill and the display to tell it is time. On average, this process takes about a minute.

clean up

The recommended amount of ice machine cleaner should be used as directed in your manual. Wait for the cleaning cycle to complete before proceeding to the next step: It will take at least 20 minutes for the cleaning process to complete. When you are finished, unplug the ice maker from the power source. If the power to the dispenser can be turned off, this is also important.

Removing Internal Parts: Before cleaning, remove all internal components from your icemaker. Refer to your machine's instruction manual for information on safe and proper removal. The next step is to remove the remaining pieces.

Mixing the cleaning solution

Use lukewarm water to dilute your cleaning solution. The correct amount of solution can be found in the operating instructions for your machine. In general, 1 gallon of water to 16 ounces of cleaner is the recommended water to cleaner ratio. Mineral deposits can affect the amount of cleaning required.

Assembled parts should be disinfected using half the water and Ice machine cleaner Combination to clean all components and parts that you have taken out of the device. When they come into contact with limescale, scale, and mineral deposits, most solutions begin to foam. After the foam has subsided, rinse thoroughly with clean water with a nylon brush, sponge or cloth.

Clean the food area

Use the remaining half of the water / cleaning combination to clean all foodzone surfaces of the ice maker and ice container / dispenser To properly clean the plastic parts of the evaporator (top, bottom, side), the container or dispenser and the side walls Use a nylon brush or cloth on the bottom (area above the trough).

Wash

Be sure to wash all surfaces with clean water. In this way, the pollutants are removed from the ice and the ice is not poisoned.

Keeping the exterior of an ice machine clean

When cleaning your ice maker, be sure to pay attention to the surroundings. Keep a clean area around your ice maker to avoid the build-up of dirt and grease that can create an uncomfortable work environment. Below are tips for cleaning the outside of your business ice cube maker.

Your immediate surroundings should be your primary concern

If necessary, be sure to sweep and mop the area around the icemaker regularly. This will ensure that your ice machine runs clean and efficiently.

Make sure you are using the correct cleaning products

To clean the outside of the ice maker, use a damp cloth soaked in water to wipe all surfaces. Abrasive pads and brushes should never be used.

Remove all grease residues

A moderate solution of detergent and water can be used to remove any remaining grease after cleaning. For a full list of restrictions, see your device's user guide. It is not recommended to clean exterior panels and plastic siding with chlorinated, citrus-based, or abrasive products.

Leave a comment