Algae are one of the most common problems most pool owners face that are difficult to tackle!
Photos by: Unsplash
Algae are a tiny plant-like organism that grows in pool water. On sunny days, the algae produce and multiply quickly so that your pool is almost completely covered by the algae. If you overlook that tiny algae speck that grows in your pool for too long, you could run into a huge problem that costs a lot of time and money to contain. It is best to get rid of the algae before they become a significant problem and use innovative prevention methods to make sure the problem never occurs again.
Types of pool algae
Knowing the type of algae that grows in your pool is crucial in determining how to get rid of the algae efficiently. There are three main types of pool algae:
Green pool algae
It is the most common form of pool algae. Green algae swim in the pool water and can attach themselves to the pool walls. Bad water filtration and insufficient disinfection of the pool could encourage the growth and spread of algae. However, this form of algae is easy to clean. You can brush it off the walls. The algae can also be found in areas of your pool that do not have adequate circulation. In this case, a little disinfectant like chlorine will remove the algae quickly.
It mainly grows on the walls and areas of your swimming pool that don't get a lot of sun. It can be mistaken for sand or pollen. Yellow bellows are hard to get rid of and you may have to take tough measures to eradicate them.
It has a strong defense mechanism and strong roots that can dig into the concrete roots of your pool. If you want more information on black speck removal, you can read more here. The features make eradicating black algae from your swimming pool an absolute nightmare and you need to take strong measures to control the black algae and make sure they don't reappear.
How to get rid of algae in the pool effectively
Brush the walls and floor of your pool
With a brush too scrub The walls and bottom of the pool allow the disinfectant you use to penetrate deeper into any algae that may be around. The process also allows you to stir up the sediment. Make sure you use a stiff pool brush on a pole to clean the walls and floor. Pay special attention to the corners and pool areas that receive insufficient or direct sunlight. Such regions provide the best conditions for algal bloom in your pool.
Manually vacuum your pool
An automatic vacuum cleaner seems like the best option if you want to clean your pool. However, this is often not the case. The automatic cleaners are not ideal for removing algae from your pool. Preferably manually vacuum your pool straight to the trash. You can then bypass the filter to prevent the algae-contaminated water from returning. Manually By cleaning the pool, you can also pay attention to algae-laden areas.
Shock the swimming pool
Algae can be resistant to the primary treatments and you may need to resort to more aggressive treatment. You may need to resort to shock treatment for your pool. Shock the swimming pool refers to the use of a high dose of chlorine and acid to clean the pool. Shock can be effective in getting rid of the stubborn species of algae in your pool. However, it is best to read the package instructions to learn how to determine the correct dose based on the size of your pool. You could also have professionals handle the situation.
Filtering out the pool algae
It is best to filter out the algae in the pool. The algae could also be the remains after the shock treatment. It is best to let it run continuously filter several hours until the water runs clear. To speed up the process, you can add some pool water clarifiers. However, it is best to check to see if you need to top up the pool water before turning on the pump.
Although you can regularly maintain your pool, algae blooms can affect your pool due to high humidity and wind. However, it is best to act immediately if you notice any signs of algae to prevent the algae from spreading as they can multiply.