20 greatest instruments in each plumber's toolbox

Every plumber needs to be equipped with high quality tools to do their job accurately and efficiently. Good plumbers know the value of their tools more than anyone else. The toolkit should contain all of the tools required for the most common installation tasks. The last thing you want is to show up on a construction site and find that you don't have the right tools to get the job done.

We've compiled a list of twenty of the best tools a plumber should have. Let's go,

List of plumbing tools

A good toolkit for a plumber includes many different tools. Here are the best tool lists for a plumber's toolkit:


Eliminate blockages

  • Hand snail
  • piston
  • Snake machine


  • Pipe and plastic pipe cutter
  • saw
  • Plumber's torch
  • Teflon tape
  • Press fitting systems
  • Pliers

Safety equipment

  • Gloves
  • glasses
  • Heat pads / shields

Other necessary tools

  • PEX pipe expanders and fittings
  • Blunt screwdriver
  • Crimper
  • endoscope

20 Best Tools in Every Plumber's Toolbox - Tools

Here are the brief descriptions of each tool:

  1. Cymbal key

This wrench is a T-shaped tool used to work on faucets. It has a clamp-like system at the bottom to allow plumbers to get into tight spaces and loosen or tighten the nuts and bolts.

  1. Pipe wrench

The pipe wrench is one of the largest wrenches in a plumber's toolbox. This heavy tool is used for loosening or tightening nuts or attaching pipes. Sometimes two pipe wrenches are used together to complete a pipe-related specific task. Pipe wrenches are also available in different lengths.

  1. Faucet wrench

The faucet wrench is one of the exotic wrenches on the market and is not used in any other list of plumbing tools. These are small and X-shaped tools used to close or open tenons and rockers.

  1. Adjustable wrench

These wrenches can easily loosen or tighten fittings and hex nuts on any pipe. The wrench comes in many sizes, but most installers prefer a 6- or 10-inch version.

  1. Hand snail

A hand auger is a device that allows plumbers to use this hand crank to run a cable deep down the drain to clean up and clear clogs. This technology has come a long way since it was invented. Nowadays there are more models with more skills.

  1. piston

Most homeowners own plungers, but some plumbers have to deal with them too. Professional plumbers need to be equipped with a heavy duty flange and cup piston that provide slightly more suction than the average consumer piston.

  1. Snake machine

A snake machine is usually a larger and motorized version of the hand worm. If the toilet blocks are very deep and difficult to move, a snake machine can help improve the situation.

  1. Pipe and plastic pipe cutter

If you're a professional who deals a lot with copper or plastic, you already know that these things often need to be replaced, removed, and resized. There is an arrangement of hand pipe and plastic pipe cutters in the store so that professional installers can choose which model is best for them.

  1. saw

If pipes, nuts, bolts, or screws don't come out easily, use your hacksaw to get the job done. If the position is tight or cramped and you cannot use your hacksaw properly, remove the saw blade and use it to cut stubborn hardware.

  1. Plumber's torch

Many plumbers require heat to solder the gasket on copper pipes. Plumber burners are small hand tools that plumbers use to apply heat to the precise areas and solder and seal new piping for setup and replacement.

  1. Teflon tape

Teflon tapes are a good choice for sealing any leaks in joints. Teflon tapes will not come off even at low or high temperatures.

  1. Press fitting systems

All press systems save plumbers money and time in the long run. These physically press a connection onto a pipe to create a good seal between them.

  1. Pliers

Like wrenches, most plumbers use pliers in their daily work. These smaller tools are the best because you can lose or tighten the bolts or nuts that are too small for a wrench to grip.

  1. Gloves

Plumbers are usually exposed to a lot of things that no one wants to touch with their hands. There are several types of high performance gloves in the store that can help protect hands and help you grip slippery objects more effectively.

  1. glasses

As a plumber, you have various problems and need to closely investigate soldering, leakage, and various things that can be harmful to the eyes. A good plumber always has safety glasses to protect his eyes while working.

  1. Heat pads / shields

Because soldering is an integral part of plumbers' daily chores and a heat shield is essential to protect yourself and the homeowner. Complete your gear bag with a heat shield and pads to protect the area from heat or fire damage.

  1. PEX pipe expanders and fittings

Pex pipe is the latest invention in plumbing. It is strong and flexible, and offers exceptional benefits and reliability. A pex expander works as a drill bit that expands the muzzle so you can install a metal fitting. Pex piping can retain its original shape when the mouth closes on the faucet, creating a perfect seal for water to pass through.

  1. Blunt screwdriver

A blunt screwdriver is a must for all plumbers. This is because it is a job saver when plumbers have to lose or tighten the screws in hard-to-reach areas that are sometimes inaccessible to a regular or electric screwdriver.

  1. Crimper

Crimpers are critical to using PEX related piping, but plumbers can use them on other types of piping as well. Crimping is primarily the process of joining different pieces of metal or other materials together by configuring both or one of them to enclose each other.

  1. endoscope

Installers mostly consider endoscopes to be cutting edge technology for plumbing professionals, but these days the experts or veterans keep it in their toolkit. These small cameras are connected to a long and flexible cable that can be used to check the condition of the sewer or drainage pipes to find out what is clogging the pipe.

Leave a comment