What to do in case your AC unit gained't activate

An AC unit has become a necessity these days due to weather conditions and other factors. Winters are getting colder and summers unbearably hot. In such cases, the best way to survive is to regulate your home temperature with an AC device. Today, most AC devices can regulate temperature in both winter and summer. As you get used to your air conditioner, you probably know how bad it feels when your air conditioner suddenly stops working. It could be the middle of summer and you will be stuck in the stifling heat not knowing what to do.

Fortunately, in situations like this, there are ways to restart the air conditioner without calling a technician. However, you need to take precautions and ensure that you do not remove any components without the appropriate technical expertise.

Here are some things to do if your AC unit stops working:

1. Check the thermostat settings.

In many cases, the simplest problem will cause the AC unit to stop working. The thermostat settings may be completely wrong. Sometimes you may have set the settings to heat instead of cool, which can cause problems with the air conditioner. In such cases, it is best to reset the air conditioner. Make sure it is cooling instead of heating. Another way to work around this is to make sure that the AC settings are automatically enabled. You will be surprised how often people call a technician when adjusting the thermostat function can fix the problem. In a very few cases, the thermostat batteries may be dead. It's always better to check this out just in case.

2. Check the air filter.

One of the most common causes of a defective air conditioning system is a dirty air filter. While your technician normally cleans the air filter during maintenance, it can still get dirty. This is especially true if you live in an area with a lot of pollution. If the air conditioner turns on but there is no cooling, you should check the air filter. If it's clogged and you can't see through it, that's likely the cause. Just remove the filter and clean it until it becomes transparent. Add the clean filter and try again. If your air conditioner is still not working, it may be time to call Sutherland Shire Air Conditioner.

3. Set the circuit breaker

Sometimes a surge in voltage can cause the circuit breaker to trip. This can also happen if the voltage suddenly fluctuates. In such cases, the circuit breaker will turn off to prevent damage to the AC unit. An easy way to work around this is to check the location of the circuit breaker. Turn it back on and try again. When you turn on the circuit breaker, you still do not respond. You should check the main power supply. Sometimes there is a problem with the power grid. This could be due to a voltage fluctuation or an earth fault. Just turn the power back on and see if the air conditioner works.

4. The fuse is damaged

Sometimes the problem can be caused by a blown fuse rather than an external problem. As with other devices, most AC devices will stop working if the fuse is blown. In such cases, you should replace the fuse before you can start the air conditioner. While you can do this yourself, it is quite difficult and requires technical expertise. Have a professional HVAC company replace the fuse to prevent damage to other parts of the air conditioner. You may also be able to diagnose why the backup was corrupted in the first place.

What to do if your AC unit won't turn on

5. The AC coils are damaged.

If your AC power doesn't start properly, it could be due to a damaged coil. This can be caused by pests, pollution, or debris blocking the vents. If the vents are completely blocked, hot air can circulate through your home and the air conditioning will not work effectively. One way to make sure this doesn't happen is to have your air conditioner serviced regularly. The technician will check the vents and remove any debris that could be blocking them.

6. The core components are damaged.

If you have an older AC unit, you may need to replace certain components of your AC unit. This is usually a problem with the capacitors as they degrade over time. It is also possible that your device has been damaged due to an accident or other cause. In such cases, you may need to properly diagnose the AC power from an HVAC professional. They will identify the exact problem and tell you which parts to replace. Unless you have technical expertise, you shouldn't try to replace parts yourself.

7. Nothing wrong with your AC

Sometimes there is nothing wrong with your AC unit. You may not believe this, but simply restarting the air conditioner could fix it!

Has it been serviced regularly?

It is much better to prevent such problems from occurring in the first place. If you want your air conditioner to work properly when it is needed, you should maintain it regularly. Have the air filters cleaned and check the gas pressure in the pipes. In many cases, a simple test can identify a significant problem before it occurs. Small leaks can be detected during regular service, and repairing these leaks will save you much later. If your warranty has expired, you should do more regular servicing as the cost of replacing certain parts increases dramatically.

Use it properly.

One way to avoid damaging your AC device is to use it properly. Set the temperature to around 25 degrees Celsius and not less than 2. Make sure the AC unit is suitable for the room size so that the cooling is at an optimal level. Taking small precautionary measures will reduce the chances of something substantial happening to your AC.

Leave a comment