Maintaining your lawnmower is an essential part of extending the life of the lawnmower and plays an important role in ensuring a healthy and beautiful lawn. Regular maintenance of the lawnmower, especially on the engine part, ensures optimal performance. As a beginner, maintaining the mower can be a daunting task as there are a number of elements to consider, including: B. the knives, or if you use a gas or corded mower, the maintenance techniques vary.
Despite the challenges, this article will guide you through the maintenance process, and in the end you will find that it is a hassle-free process.
1. Read the manufacturer's manual
A new mower is supplied with an instruction manual. So go through it and analyze what the manufacturer is suggesting. You don't want to damage your mower during maintenance. Therefore, follow the instructions on the letter. If you do not have the manual, the following steps will help you with maintenance.
2. Drain the fuel from the mower
Your mower may not start and one of the main causes could be the old gasoline that is clogged in the engine. After every mowing, make sure that you drain all fuel from the engine and add fresh oil. Some lawnmower engines lack an oil filter, and the old oil could damage the engine. If you are used to mowing your lawn once a year, change the oil before storing it. Also fill the mower with fresh oil to the recommended level.
3. General cleaning
If you have a power or robotic mower, look for a stick and remove any debris on the cooling fins. Wipe the housing and motor with a dry rag and make sure you can reach all areas with gas or oil openings. Robot mowers are easier to maintain, and lawn mower experts at https://lawnaholic.com/ recommend beginners to review the best robot mowers before buying and find one that is easy to clean. If you have a push mower, use a wire brush or a stick to scrape the accumulated debris on the fins that can be found around the engine. Blow off the mower with a hose spray and clean all metal parts and knives with an oily rag.
4. Blade maintenance
If you notice a white tinge or worn blades of grass after mowing, this may indicate that the cutting blades need to be sharpened. It is always advisable to get professional help when sharpening the edges, although you can grind them yourself. Place the blade on a vise and sharpen the blades from the outside edge with a grinder or bastard file as you move toward the center. After sharpening, check that the knives are balanced before placing them on the mower.
5. Replace filter
The condition of the air filter has a significant impact on the mowing experience. So make sure to replace the filter from time to time. Most air filters are made of paper or foam. If your mower has a paper filter, replace it at the recommended time. If your mower uses a foam filter, you should remove it and drain it in oil. Filters are sometimes clogged with dirt. If you notice this, tap a hard surface to remove the clogged dust.
6. Wait for the spark plugs
A properly maintained mower's plugs can last up to a year, although mower complications fail. Remove the spark plugs with a wrench and check for soot. If soot has accumulated, clean it with a dry cloth. However, warm spark plugs must be replaced. This should cause problems because spark plugs are cheap and easy to replace.
7. Fogging the engine
If you mow the lawn regularly, your mower will remain idle most of the time. In such a case, the engine oil can drain out over time and the surrounding water can damage or corrode the mower. Fogging the engine with oil can reduce the risk of water damage. Read the operating instructions and determine whether your mower needs to mist up before starting the process.
Mowing the lawn sometimes seems an easy task, but it's more than just moving the mover through the grass. The mower must be serviced for proper lawn care. To achieve this, the instructions above can be helpful. Make sure you follow safety precautions when managing your mower, and above all, follow the manufacturer's manual.