There is a wide range of pipe lining materials for various reasons and purposes.
If you're thinking about replacing your pipe liner, here are just a few of the different pipe liner materials you should know:
Polyvinyl chloride (PVC)
These tubes are available in different thicknesses. The most common are usually 40 and 80 schedules. The higher the schedule, the thicker the walls. Schedule 40 is normally used. However, Schedule 80 PVC is stronger, which makes it able to handle high pressure. If you expect these pipes to carry cold water, PVC is the best option for you. This is because hot water cannot get through PVC pipe lining material as it easily disintegrates. This also applies when PVC is exposed to the sun. One of the advantages of PVC is that it doesn't corrode or rust over time. In addition, if you expect replacement and repairs, it's a cheaper option. At the same time, you need to make sure that you maintain your business properly so that it doesn't turn out to be too easy.
copper
The good thing about the lining material is that it can absorb both hot and cold water, as this metal is heat-resistant, does not corrode easily and has natural antimicrobial properties. It's a little more expensive than PVC pipe liners, but it's more durable and can withstand both hot and cold water. In addition, copper with an average lifespan of 50 years lasts longer before you need to replace it. Because it's sturdy, you can also use it with sleeves underground.
Acrylonitrile Butadiene Styrene (ABS)
ABS is somewhat more susceptible to deterioration compared to PVC due to its weather resistance due to damage from sunlight. However, ABS is still strong and very easy to install. It has chemical resistance and excellent electrical insulation properties. It can be used for your pipes to carry hot and cold water. However, some of the shortcomings of this type of liner are dangerous when burned. When installing ABS, you need to check your building's and engineers' regulations to determine if it is suitable for PVC.
Galvanized steel or iron
Since this type of pipe lining is also covered with another zinc layer, it prevents corrosion by water and makes it firmer and more durable. One of the other advantages of galvanized steel or iron as a pipe liner is the lower cost compared to stainless steel. Although the cost is lower, the life expectancy of this type of feed is still quite long.
Cross-linked polyethylene (PEX)
Cross-linked polyethylene, also known as PEX, is one of the types of pipe lining materials used for cold and hot water supply lines. Since it is very flexible, you can bend it around some obstacles or corners on the walls. In addition, it is also not susceptible to corrosion and very durable. Depending on the temperature, the material contracts and expands. For this reason, it is frost-resistant and not very stiff. Since it can snake through your existing piping, it's easier to re-pipe if you need to fix it. This type of piping is much cheaper compared to metal pipe linings, but it is durable.
To lead
You need to know what lead pipes are because they are lead pipe material that you need to avoid. Most of you may have heard of lead levels in the water, leading to many serious health problems, such as nervous system and kidney damage, to name a few. Even small amounts of lead can be harmful to health. Since it was only widespread until the 1950s, the lead pipe lining material is usually found in old houses. So if you install a pipe liner, avoid lead. If you live in an old house or want to buy an old house, have a technician check the type of pipe lining material used. If so, you need to change them quickly before someone gets sick.
Conclusion
The material of the pipe liner that you should know and need depends on the use of your pipes. Different types of purposes require a certain type of pipe lining material. You can use the instructions above to check which ones you need for your pipes.