5 methods to scrub a water tank

The use of water tanks has grown in popularity across Australia over the years. The use of rainwater tanks offers numerous advantages: They minimize your water consumption, reduce the cost of water bills, have a positive impact on the environment and offer fresh water supply. However, most water tank owners are unaware that water tanks need to be cleaned adequately, and they don't know where to start the cleaning process. It is extremely important to ensure that your water tank is clean and fresh and that there are no bacteria and germs that can contaminate the water in the tank. Although water tanks do not need to be cleaned excessively on a regular basis, it is essential to ensure that any deposits, leaves, dirt, or even mosquitoes that have fallen or caught are immediately removed to ensure good tank health and thus optimal water health.

This article takes a close look at how you can effectively clean your water tank and how you can get high quality results and ensure the health and safety of your tank and household. Here are 5 ways to clean a water tank:

  1. Professional cleaning

Cleaning your water tank can be tiring and time-consuming. The best way to save time and get high quality results for you Toowoomba water tanks the support of specialists is to be sought. They have the necessary know-how, experience, skills, tools and equipment to get the job done right the first time.

  1. Make sure that the power supply is disconnected

If you want to clean your water tank yourself, please follow the guidelines below to ensure your safety and achieve the final results. If your water tank is connected and supplied with electricity by an electric pump, you must switch off all power supply systems for your safety. For additional security, it is also very important to pull the plug straight out of the socket. Disconnect all power sources connected to your water tank from all power sources before you start cleaning.

  1. Drain tank

The first step to achieving a sparkling clean water tank is to drain any residual, contaminated and dirty water in your tank. This can be done by simply opening the drain valve. In order not to waste any residual water, you can also connect your hose to the drain valve and use the remaining water to keep your garden moist or wash your car. Let the water tank completely empty before proceeding to the next step. This may take some time depending on the size of your water tank.

  1. Flush tank inlet

The next step is to make sure your water tank inlet is completely clean. If you don't follow this step, only the new fresh rainwater that flows into your tank will be contaminated and will achieve the opposite of what you want to achieve during the cleaning process. To clean the inlet of your water tank, simply rinse it with fresh water from a garden hose or even a pressure cleaning wand. Let the water flow and rinse until the fresh water is clear.

  1. Clear, sweep and scrub

Depending on the size of your tanks and if you are able to physically get in, the next set will need some elbow grease. First remove and remove any remnants and remaining leaves and debris, sweep out excess mud and dirt and remove all mold and stains with a high-performance brush. Once everything has been removed and cleaned and stubborn stains removed, rinse it off with fresh water and your water tank will look brand new in no time.

5 ways to clean a water tank - cleaning the inner tank

There are a number of advantages to having a water tank in your home. Many Australians switch due to the reduction in water bills and the extra water available to wash your car, water your garden, fill your pool, and provide water for toilets and washing machines. Ensuring the cleanliness of your water tank is of the utmost importance for the quality and health of the water. If you don't want to spend time building your own water tank, there are many professional water tank cleaners on the market who will be happy to help you!

Author bio

The article is provided by Jim Pulman, who has extensive knowledge and experience in the areas of housing, construction and design. In his free time, he writes articles and works with content creators to share his expertise with the online community.

Leave a comment