Tips on how to scale back mildew and mildew within the dwelling

Detecting mold and mildew in your home is never a good thing. Mold and mildew can lead to many health problems, including breathing problems such as congestion and cough. And the longer you are exposed, the more likely you are to experience chronic problems like asthma.

Unfortunately, many people have mold and mildew in their home without realizing it. These toxins remain in moist areas, e.g. B. in your basement, in your bathroom or near your pipes. In some cases it can even be on your walls! If you find mold in your home, you want to find a way to reduce it. As long as it's not black mold, you should be able to remove the mold from the surface with a mixture of bleach and water. Once you have cleaned it up, you should follow the steps below to make sure mold and mildew don't return.

Look for problem areas

The first step you want to take is to look for problem areas. Sometimes it will be obvious. You may have a leaky pipe. If the problem is in the bathroom, the room may not be adequately ventilated. If the problem is in the basement, it may be more difficult to pinpoint the exact cause. There are several reasons why your basement can get damp, including a crack in your foundation, water retention on the side of your house, or poor basement insulation. You may need to contact a professional to isolate the problem.

Check your drainage system

Don't forget to check your drainage system when trying to pinpoint problem areas. Many people overlook their drainage system and find it difficult to find out where the moisture comes from. However, if your sewage system is clogged, this water can get into your basement through your foundation. Another problem with drainage systems that can lead to moisture is that your drainage system directs the water far enough away from your house. The water collects against your house, causing the water to seep into your basement. Get in the habit of checking your drainage system regularly to avoid potential problems.

Ventilate damp areas

Once you have identified the problem area, decide whether additional ventilation is required in that area. Airflow can be created by ventilation so that moisture can escape more naturally instead of creating moisture. Ventilation is important as it can direct fresh air into your home. A balanced system that supplies both inlet and outlet is usually required to ventilate your home. This allows the moist air to be removed and fresh air to be admitted. At least ventilation systems should be installed in all bathrooms. However, some people also put them in their basements and garages.

How to reduce mold and mildew in the home - remove

Improve the air quality at home

Your next step is to improve the air quality in your home. Even if you try to find ways to fix problem areas and install ventilation, moisture can still get into your home. Despite all efforts, some moisture is natural. One way to further reduce moisture is to use a dehumidifier that helps remove excess moisture and other toxins from the air. Dehumidifiers are available in different sizes and with different functions. At you will find an overview of various dehumidifiers. You may also want to pair the dehumidifier with some kind of air purifier.

Get rid of infected objects

Finally, look around your home for infested items. If fabrics store moisture, there is a chance that mold and mildew will grow inside. These include upholstered furniture, soft toys, clothing, carpets, curtains and carpets. If there is a possibility of water being retained, be sure to check it! The fabric usually smells musty when mold or mildew appear. Depending on how bad the time is, the item may be able to be cleaned. However, if it has been exposed to moisture for a long time, it may be best to throw it away.

in total

When it comes to reducing mold and mildew in your home, your first step is to clean it and find out why it is forming. Once you've found the problem area, take preventive measures such as: B. the use of a dehumidifier. Also, don't forget to look for damaged fabrics!

Leave a comment